、
The production method of smokeless wood stove is as follows:
First, draw the frame of the smokeless wood stove and cut a shallow hole 3 centimeters below the border. Then start building red bricks, bricks are flat, remember to leave the stove; The bottom of the stove is about 25 cm high, which is used to place the dust leakage net.
The next 6 layers of bricks begin to build a smoke outlet, and build a smoke outlet about 30 square meters from the back half brick in the middle of the stove; Build it all the way up, and the stove is close to waist height. Finally, a smoke outlet extending to the roof was built to complete the production.
Energy saving smokeless wood stove needs attention:
1, generally for the convenience of lighting, we will choose a relatively thin wood strip, placed in the wood stove, dry branches or wood chips. Because these materials are very suitable for drill firing materials. The fuel is generally a relatively dry long wood, too wet wood is not easy to burn, more smoke.
2, the fuel added to the wood stove can not be too full, too full will cause a lot of heat loss in the wood stove, the actual thermal efficiency is only the bottom of the pot. In the process of adding wood to the wood stove, we try to control the amount of a charge and exhaust it.
3. After the wood stove is used up, there should be leftover fuel in the fuel barrel. At this time, do not directly close the furnace door to destroy the product. After removing the fuel drum from the wood stove, we can turn off the fan.
4. Also pay attention to adjusting the firepower of the wood stove. The fire setting of the wood stove should not be too large at one time, because the fire can not be changed immediately during the setting process, and it takes a certain amount of time to reflect it.
SSM professional production wood stove,charcoal stove,wood burning stove,cookstove,cleancook stove,pellet stove,SSM stove, small wood stove,biomass cook stove,camping wood stove,wood cook stove;Welcome to inquire:projects@ssmstove.com